Dust bin sensor faults automatically - no obstructions

S

slalom frog

New member
Today by Clearvue dust bin sensor started going into fault mode automatically. Here are some details:
  • The sensors at the cyclone are working and both are illuminated with a solid red and green light.
  • The cyclone is clean.
  • I turn on the bin sensor and after about 7 seconds it goes into fault mode.
Here is a short video of what is happening - https://photos.app.goo.gl/gVvtNkVsKDwDPGAB7

Any advice would be greatly appreciated! Thank you!
 
You must log in or register to reply here.
Back
Top