Ryan Brucks
New member
Hey guys,
I was curious about the 5hp rating on the 3 phase version. The instruction manual only lists the FLA for the single phase version, but lists it at 20.8amps.
I was looking at the Leeson line, here:
http://www.clrwtr.com/PDF/LEESON/LEESON-Three-Phase-AC-Motors.pdf
And the 20.8a figure actually puts this motor in the 7.5hp range for the 3 phase motors. But it's correct for the single phase range.
Am I looking at the wrong figure for the 3 phase version? What's the real draw to be expected?
Seems like either the 3 phase version only draws 13 amps, or they are actually using a 7.5a motor.
Thanks!
Ryan
I was curious about the 5hp rating on the 3 phase version. The instruction manual only lists the FLA for the single phase version, but lists it at 20.8amps.
I was looking at the Leeson line, here:
http://www.clrwtr.com/PDF/LEESON/LEESON-Three-Phase-AC-Motors.pdf
And the 20.8a figure actually puts this motor in the 7.5hp range for the 3 phase motors. But it's correct for the single phase range.
Am I looking at the wrong figure for the 3 phase version? What's the real draw to be expected?
Seems like either the 3 phase version only draws 13 amps, or they are actually using a 7.5a motor.
Thanks!
Ryan
Last edited: