Waiting for my CV1800 to arrive so I'm working on duct layout. I'd like to run a 6" duct to the tablesaw cabinet and a 4" flex to the guard over the blade. I realise this is a bit to much duct (5" & 4" would be best) but how would it perform?
I ordered the cyclone with a 16" impeller and I'm hoping the additional 20-25% airflow can handle it.. All the rest of the duct is 6" and the run from the cyclone to the tablesaw cabinet will be about 16'
Thanks
Brian )
I ordered the cyclone with a 16" impeller and I'm hoping the additional 20-25% airflow can handle it.. All the rest of the duct is 6" and the run from the cyclone to the tablesaw cabinet will be about 16'
Thanks
Brian )