I'm trying to see if I can configure a CV1450 into my garage shop with low ceilings, and I do not want to cut open the sheetrock ceiling, remove insulation, and put the motor up between the joists. The ceiling is 86" high. I've calculated that I can just fit an 18" high custom dust bin directly under the bottom of the cyclone.
My design is a rectangular air-tight box, whose front is hinged to lift up so I can slide out a rectangular, clear, polycarbonate food container to dispense the dust. The first question I have is could a rectangular dust bin even work, or do the fluid dynamics of a cyclone require a round dust bin? Thanks in advance, Dave
My design is a rectangular air-tight box, whose front is hinged to lift up so I can slide out a rectangular, clear, polycarbonate food container to dispense the dust. The first question I have is could a rectangular dust bin even work, or do the fluid dynamics of a cyclone require a round dust bin? Thanks in advance, Dave