I'm considering of mounting my filters in a considerably different way from what I've seen anyone do so far. As a result of how I mounted everything, I don't have a lot of extra space that would normally be under the filters (4-5"). Here's what I'm thinking of.
- Concrete anchors in the concrete floor
- Place bottom filter (gasket down) on floor and bolt down
- Place top filter (gasket down) on top of bottom filter and bolt together using threaded rod
- Glue flanges to both the top of the top filter and bottom of the transition
- Short piece of big clear flex between the two
It seems that I'd be able to disassemble the filter assemble very easily with it like this and it'd be 100% sealed.
Thoughts?
- Concrete anchors in the concrete floor
- Place bottom filter (gasket down) on floor and bolt down
- Place top filter (gasket down) on top of bottom filter and bolt together using threaded rod
- Glue flanges to both the top of the top filter and bottom of the transition
- Short piece of big clear flex between the two
It seems that I'd be able to disassemble the filter assemble very easily with it like this and it'd be 100% sealed.
Thoughts?