Is it possible to use a mirror image of the impeller housing, so that the exit is on the left hand side (when viewed from the front). My installation is venting externally and will exit through a wall to the left of the cyclone, and in that orientation the impeller housing exit is approx 12" / 30cm away from the wall. I'm wanting to get it to sit closer to the wall.
My concern is that the impeller would need to be run in the reverse direction, so the backward inclined fan would become forward inclined. I guess this would change its performance, and noise.
Any thoughts ?
My concern is that the impeller would need to be run in the reverse direction, so the backward inclined fan would become forward inclined. I guess this would change its performance, and noise.
Any thoughts ?