Happy New Year to everybody.
The overbag: It is a fine nylon mesh that is put around the outside of the filter to stop chips getting into the pleats of the filter and to make the filter faster an easyer to clean.
I had need for something after I had a bin overflow into the filters and had to spend a day cleaning my filters. Because I set my filters up differently to the 'norm', but according to the design of the manufacturer, making the air flow from the outside to the inside. Cleaning the filters is than done from the inside with compressed air.
By accedent I found an image where an overbag is put over filters in the woodindustry. http://www.farrapc.com/products/overbags
I contacted my Danaldson supplier and he sent me partnr 262-2099. They were not a perfect fit but easy to adapt. (they were for a model with a bigger diameter)
I will try to get some warning system in place but until then this protection is a great step forward.
You can find more pics in the gallery. I added the pics at the end (of the galley).
http://www.gallery2.clearvuecyclones.com/v/CV1800+and+CVMax/Erik_Gent/
Erik
Gent, Belgium
The overbag: It is a fine nylon mesh that is put around the outside of the filter to stop chips getting into the pleats of the filter and to make the filter faster an easyer to clean.
I had need for something after I had a bin overflow into the filters and had to spend a day cleaning my filters. Because I set my filters up differently to the 'norm', but according to the design of the manufacturer, making the air flow from the outside to the inside. Cleaning the filters is than done from the inside with compressed air.
By accedent I found an image where an overbag is put over filters in the woodindustry. http://www.farrapc.com/products/overbags
I contacted my Danaldson supplier and he sent me partnr 262-2099. They were not a perfect fit but easy to adapt. (they were for a model with a bigger diameter)
I will try to get some warning system in place but until then this protection is a great step forward.
You can find more pics in the gallery. I added the pics at the end (of the galley).
http://www.gallery2.clearvuecyclones.com/v/CV1800+and+CVMax/Erik_Gent/
Erik
Gent, Belgium
Attachments
Last edited: