I am having a problem with the dust bin. I have a light sensor mounted at the bottom of the input duct feeding into the 55 gal dust collection bin. The sensor has a five second delay after which the blower shuts off. A 55 gal plastic trash bag in installed in the drum.
When I run a machine the dust seems to collect around the base of the cyclone blocking the sensor and causing the blower to shut down. Even if I shut off all machines and run only the blower the dust continues to rotate around the base of the cyclone.
A second problem is that the dust bin fills up very fast. When I open it I find that the saw dust in very fluffy. I can just press it down and it fills less that one half the can.
I am unable to use the system as it is because the blower keeps cycling off and on. What am I missing?
I am unsure how to correct the problem and would welcome any ideas.
When I run a machine the dust seems to collect around the base of the cyclone blocking the sensor and causing the blower to shut down. Even if I shut off all machines and run only the blower the dust continues to rotate around the base of the cyclone.
A second problem is that the dust bin fills up very fast. When I open it I find that the saw dust in very fluffy. I can just press it down and it fills less that one half the can.
I am unable to use the system as it is because the blower keeps cycling off and on. What am I missing?
I am unsure how to correct the problem and would welcome any ideas.