VermontDale
New member
We are switching from a single phase motor to a three phase motor on our CV 1800. We need to remove the tapered bushing which holds the impeller on the motor shaft.
We removed the three bolts which hold the tapered bushing in place as well as the set screw which holds the key in place. Then we tried using a puller. We can not get it to budge.
Suggestions?
Dale
We removed the three bolts which hold the tapered bushing in place as well as the set screw which holds the key in place. Then we tried using a puller. We can not get it to budge.
Suggestions?
Dale