I checked and rechecked my ceiling height at 96 inches. The lift works great and drew the motor to 1" from the ceiling. I locket the lift trolley to the upper mounting anchors and leveled everything but low and behold the filter transition is 1.5 inches to low and the bottom of the cyclone is about 2.0 inches to low.
A little brain power tells me to scribe the top of the cyclone uppermost section, cut and remount, raising the cyclone. Then I need to reconfigure the cleanout to drop the filter down the required amount.
Anyone else had to do this. I wonder if the height discrepency is due to the larger blower 16"? Thoughts and comments welcome.
A little brain power tells me to scribe the top of the cyclone uppermost section, cut and remount, raising the cyclone. Then I need to reconfigure the cleanout to drop the filter down the required amount.
Anyone else had to do this. I wonder if the height discrepency is due to the larger blower 16"? Thoughts and comments welcome.