6" Flex over 6" S&D

[wmlutz]

I am to the stage of installing 6" flex hose on the D2729 pipe. I was not looking forward to this based on all of the comments about difficulty. What I did was to heat about 2" - 3" of the flex hose with a heat gun and then I was able to stretch the flex hose with the wire still in the flex hose on to the pipe without too much difficulty. Just make sure you get the flex hose where you want it before it cools down because after it cools the flex is almost impossible to move. I used the flex hose from Wynn Environmental like many others on here. Hope this helps others with trepidation like myself before trying the install.